About Rustic Roots Warehouse
The casing on that doorway is proud on the left and shy on the right. So a stock door will not sit in it. Custom Woodwork in Belmont starts with questions about the house. Ask how we measure an opening that is out of square. Ask whether we template on site. When the floor drops between the jambs, photos won’t show it.
Because many Belmont homes date from the mill era, odd openings show up often. Worn trim and floors that are not square show up with them. Stock pieces often won’t fit. So talk through the fit before you pick a stain.
Always Growing. Always Creating.
Custom Woodwork in Belmont: Site Measures
When we walk an older house, we carry a story stick and a level. We mark the high corner and the low corner on one sketch. Paint on old trim steals clear width. So we measure the opening and the door swing on site.
After that we check what the new piece has to meet. A mantel has to clear a hearth that is no longer flat. People in Belmont have called after a stock unit would not go into an older kitchen.
Where the Work Begins
The work runs in a set order once we finish the measure. We mill the stock to the opening, then we fit it in the shop. Because we run our own sawmill, we can saw a board to the thickness an old jamb needs. Inventory lumber covers a job when the species on hand will do.
For a qualifying customer-owned log, we can custom-mill that wood too. Then slabs from the Lucas mill can run up to six feet wide. Our kiln work starts at a 500-board-foot minimum. So a small piece usually comes from lumber we’ve already dried.
Shaped by Nature. Finished by Hand.
For an older room, Custom Woodwork in Belmont often means matching trim that is already there. We copy the profile and stay near the old color range. But a live-edge slab can work for a counter. Square casing needs square stock. When you want that look, epoxy fills a void in a slab. Ask to see finish samples in the light your room has.
A Resource for Ideas of Every Size
Shop Time for Custom Woodwork in Belmont
How long the job takes depends on drying and on the fit. Because install adds its own time on the schedule. A piece from dried stock moves on the schedule we write on the quote. Customer logs have to be milled and then dried. A casing set takes less bench time than a wide slab top.
Getting the measures right can mean a trip to the house. When the opening is badly out, photos aren’t enough. We template in Belmont when a phone picture would miss the low corner. After that, we fit the piece on the bench.
More to Discover Around Every Corner
We price Custom Woodwork in Belmont from the same things that drive the time. The quote moves with the species and with slab width. Then a film finish takes more bench time than an oil. And copying worn trim takes more time than a square edge. We write quotes out line by line, so the wood and the fit show up as separate lines. But we won’t price a doorway from a text-message photo. After the measures, the number belongs to that opening. A field change should be a new line on the quote.
See What We’ve Been Creating
After the piece is in, the wood still moves with the season. Summer air in this part of North Carolina stays humid, and winter heat dries a heated room. Wood takes on moisture across the grain, so a wide top can grow a little in width. When a door starts to rub, check the reveal before anyone planes the edge. So planing a seasonal rub can leave a gap in the dry months. Ask how much clearance we leave in an older Belmont house before you book.
Planning an Outdoor Project?
Porch Fit and Custom Woodwork in Belmont
In Belmont, a porch rail and an interior casing need different finishes. A screened porch stays damper than a closed room. For exterior work, ask what upkeep the finish needs. Then ask how much rain the wood will take.
Interior trim in a mill-era house is often original casing plus later patches. So bring a loose piece of old trim if you have one. We can copy that profile in the shop. You can see tables and mantels on our custom woodwork for fitted rooms page. Matching a worn profile takes longer, and the quote should say so.
Paint buildup is the detail people forget. Because old casing can carry enough paint that a new door still binds. When we see that, we size to the paint or talk through a scrape at that opening only. Hardware is the other late item. But old hinges may not match a new stile. A latch from the old door can sit wrong on a thicker slab. Ask whether we reuse your hardware, and who supplies the hinges, before we cut.
Come See What’s Taking Root
Before you book Custom Woodwork in Belmont, ask which species we have dry right now. Ask how that species moves in damp air and in heated air. Then look at live-edge slabs if a counter is in the job. But a casing job may never need a slab. Clear the doorway so a level can sit on the floor, and note any soft trim. After the visit, the quote should name the stock, the finish, the fit, and whether we install.