About Rustic Roots Warehouse
People picture a built-in as a short delivery job. They expect a truck and a weekend install. That picture fits a stock cabinet for a square hole. Custom Woodwork in Tega Cay takes a site measure, shop build, finish time, and a return trip, so it runs past a delivery weekend.
Because the wall is the starting point, we measure before we cut. So the clock includes fitting odd spots near the glass along with the bench time.
Always Growing. Always Creating.
What Sets the Pace for Custom Woodwork in Tega Cay
Warm months leave lake-facing rooms in Tega Cay, South Carolina damp. Wood takes on moisture across the grain in that air. When a wide shelf grows in width, the length barely changes. So we leave a small gap at each end. Then we can set the shelf without cutting it again on site.
Where the Work Begins
After you approve the plan, the work runs in this order.
- First we measure, and we mark any bow near the glass.
- Then we pick from air-dried or kiln-dried stock, unless you want us to mill a qualifying log.
- After that we build the unit on the bench and finish it before it leaves.
- We haul it to the house and scribe the edges to your wall.
If the boards are already dry on our racks, we skip a long wait. But the finish still needs time to harden before you load the shelves.
Shaped by Nature. Finished by Hand.
Time and money follow the same steps. Extra doors and a fussy scribe add shop hours. For Custom Woodwork in Tega Cay, we write those hours out line by line. You can see which line adds the days.
Some owners take the piece raw and finish at home. Then our shop clock stops after assembly. We still fit it on site. An epoxy edge needs cure time before sanding, and that wait stays in the shop.
A Resource for Ideas of Every Size
Install Day for Custom Woodwork in Tega Cay
We book install once the finish can ride in the truck. The trip into Tega Cay sits inside that day. Because rooms near the water have felt humid on our install days, we want steady house air. So keep the windows shut the night before if you can.
Odd corners add time once we are on site. We’ve scribed sides to plaster that waved. After the first scribe, a second pass is common there.
More to Discover Around Every Corner
When you want species and finish options, look through our custom woodwork. Built-ins use that same bench. A mantel can share a finish day with a wall unit.
We mill much of our own lumber. So the built-in can start from our racks. When dry stock matches, shop time starts after the measure. When it does not, we say so before we name a date.
See What We’ve Been Creating
After install, give the piece time before you load it. Hinges may need a tweak once the wood meets the room. People have asked us to set Custom Woodwork in Tega Cay against a glass wall. People have called when a door rubbed after a sticky stretch. Then a small gap lets the door settle.
Planning an Outdoor Project?
Porch Pieces and Custom Woodwork in Tega Cay
Covered entries in Tega Cay sit in damper air. We’ve built porch benches for those spots. Shop steps match an indoor unit. An exterior finish needs longer to harden in outdoor air. So we put that finish on the quote with the other shop lines.
The wall or the lumber stretches the calendar. Photos hide a bow we only catch with a level. Because stickered boards still need to dry, we wait to cut them to final size. Custom Woodwork in Tega Cay meets that bow where a window return runs out of square.
Come See What’s Taking Root
Ask which species we already have dry. Dry stock from our sawmill shortens the wait. A qualifying customer log can work, and we mill those. Our kiln minimum is 500 board feet. So a small built-in may batch with other lumber before we name a date.
Bring a photo that shows the floor line and the window returns. Baseboard can hide a bow, and the photo shows it.